Sublicotton Heat Press Application Instructions

Recommended for: White or Light Colored 100% Cotton Fabrics

Printing SublicottonTransfers

Printing and transferring an image onto a white or light colored 100% cotton garment is a breeze. Just follow these simple steps, and you are on your way to creating one- of-a kind, beautiful and profitable products.

1. Load Sublicotton paper into your printer. The printable side is opposite the Sublicotton logo.

2. Create or import an image into your graphics application.

3. Click Print in your application and select the ChromaBlast driver as the printing device if using Virtuoso System  if not follow paper settings .

4. Ensure that the Mirror option is selected in the ChromaBlast Power Driver, unless you have already

   reversed the image in your graphics application.

5. Print your Sublicotton transfers

Heat Press – Transfer Instructions

1. Set your heat press as recommended in the chart below

2. Place the garment on the heat press, and position the Sublicotton paper, with the image facing down,

   over the garment.

3. Immediately place a Teflon heat sheet or parchment over the entire transfer.

4. Press to transfer at the recommended temperature / time / pressure

5. Sublicotton media may be removed by HOT PEEL or COLD PEEL techniques. Test results indicate better

   wash fastness with the HOT PEEL method.

   1. HOT PEEL - While still hot, and with an even motion, peel the ChromaBlast paper off the garment (hot peel), and stretch

      the image area from top to bottom and side to side to reduce the hand on the fabric.

   2. COLD PEEL – Wait for the transfer to cool at least two minutes and remove the backing paper as specified above.